AeroPod, PowerPod and Newton

Hi! Put your new HRM on you and do a new sensor pairing again. Should be enough. After that, to be sure, connect the PP to Isaac and, in your active profile, load the sensors ID from the PP (is a dedicated button in the sensors tab) to see if the old values was changed. Stay safe and ride hard! :) ...

Good day, I would like to change of my main profile the HRM sensor to other HRM band . because I can't have two sensor linked, isn't it? How could I do this? I'll do a half IRONMAN next Saturday, and i use to use a cycling hrm for training with my bike. But I have other one to run and Triatlon. Rega...

Your profile is close, but I tweaked it a little bit. Load this into your Device and your TT CdA will be stored. Thanksss!!! I've ride today with the profile you left me here. Maybe you can check my ride to confirm :) I've seen that I work but I move less watts in comparison with the effort perceiv...

Please post a ride file and we will take a look. Good day !! Here you are Cal ride file, and post calibration ride in 2 parts. Please, let me know if It's ok. I have extracted both profile of each file and have differents areo value and wind scaling. Cda is 0,25 because I edited it, It kept in 0,35...

Your CdA should be around 0.25 for a TT bike. I don't understand why yours is so high. In Device/Setup Newton..., choose the Time Trial position I am really worried about your mount. It looks like it is a sawed-off piece of carbon fiber, stuffed between your aero bars. If you can wiggle your PP at ...

Hi, I have edited last post with two question while I was setting the new TT profile.

Please, help me

If this mount is very stiff (machined aluminum or VERY STRONG) plastic, it will be OK. Or, you can use our TT mount, which attaches to the aero bars. You can use Isaac to set a profile for your TT bike. Good day, Finally, I have adapt my bike to TT position and I've set up my PP as TT profile. But ...

Good day, I'll do a half Ironman next April 1st, I've decided to adapt my road bike to TT position with TT bars ... But I have some questions: 1. I have to set up newton PP with TT profile and calibrate. Is cda the same for a road bike with aero bars, than a TT specific bike? How many affect the pos...

Actually, your ride files are perfect. It looks like the new O&B calibration improved the accuracy of your device. Have fun! Thanks a lot!! I really appreciate your efforts to help us. A great product isn't only a good hardware, It's also all the people behind working to give the best to his cu...

Good day,

I have follow the steps you bring me to re calibrate my PP after last firmware update.

Here you are .ibr file of ride calibration and my ride of today after this.

Please, could you check it? I have observe higher wtss than before.

Regards!!

Good day John, Today in my 45km ride, I think I was having problems with sync between PP and my garmin. But Now reading this, It was the cal O&B ride. How can I do this new O&B cal ride again? I was riding for an hour with "50wtt in my garmin field" and when I went back It get 100w...

Good day,

Could you look at it? I have a new ride from today.
I usually ride on hood, but I have hood elbows bent. Is it a big difference? Maybe I should recalibrate from the beginning?

Regards

Velocomp wrote:Please post ride file.

Here you have john!

thanks in advance

Hi john, I was looking to set up my weight... because I gain weight in christmas, but something strange happen. I procced as follow: 1. I extracted the profile of my last ride file. 2. I edited my weight in "advance" 3. I change switch profile after ride. Then, the average watts of the tra...

Velocomp wrote:

Sergioperi wrote:Good Day John,

Today I made a short training, 31km (19,26m). Here you have .ibr file to check calibration... if all is working properly, or I need to change something of the profile

Thanks in advance!

This looks GREAT!!!

Nice to know it !!! Now... Training hard!!

Thanksss

Good Day John,

Today I made a short training, 31km (19,26m). Here you have .ibr file to check calibration... if all is working properly, or I need to change something of the profile

Thanks in advance!

This is a 50KM ride out and back ride., 50Km is quite long for the check calibration feature. I note that, between KM 7 and KM 24.5, wind speed is almost identical to bike speed. This suggests your PP is well-calibrated. Between KM 4 and KM 7, and KM 24.5 and KM 27.2, wind speed is less, as if you ...

Velocomp wrote:I think you are OK, but do a new ride and then post it. I will check it.

Hi again!! Here you are a new ride file.

Could you please check the calibration? I have take a screenshot of "check calibration tool", What do you think about it?

Thanks again, Best regards!!

Velocomp wrote:I think you are OK, but do a new ride and then post it. I will check it.

Thanks for all John!! I'll do it in few days Best regards, and happy new year to all!

This looks great! Thanks!! :) Then... Would do you do a check calibration with this ride and send the new profile to PP with the changes like the pics? Or the profile is fine? I think the PP is working properly, but I haven't made a "check calibration" before, and I use to read this like ...

Velocomp wrote:Please post your .ibr ride file.

Thanks for fast answer!

Yes, the file .ibr was on the top of the photo Here you have again.

Regards!!!

Either alternative will work. Good day John, Today I made an out and back ride of 45km. (I attach the .ibr file) Could you please say me if you see something wrong? Because there're a short time that PP read drafting, but I've ride alone all the ride. Is this file good to made a check calibration? ...

Apologies for asking this (again?) but what would be the consequences of riding with PP without a cadence sensor? Would it still report power OK or is cadence necessary? My cadence sensor is at best intermittent and at worst now broken... I won't rush to replace it if it's not going to affect the P...

thomask wrote:Probably a more stable signal as the distance would be reduced.

Thanks for your answer!!

Everything looks quite good. If you have your speed sensor on your rear wheel hub I would move it to the front wheel hub. Thanks John!! Would yo do other ride out and back to check calibration with isaac software? Tomorrow I will ride with some friends, I will change the sensor to the front wheel, ...

Good day, I need feedback with my first ride to :) I tagged @ridevelocomp in instagram's photo and somebody of your company said me that may be the PP is not correctly mounted because during the calibration it read a pending variation that fix the calibrtion after 8 minutes. I have attached photo of...

Good day John, I have another question about calibration ride. I have set up from isaac newton a profile, then I have set up the weight with more accurate data and send PP. I have sync all the sensors (HR, Speed and cadence) with it successfully. Now my question is: Could I make the first calibratio...

Good day, I have recently bought a Powerpod. I will calibrate it this week and I will do the out and back ride to check calibration step. But I have a question reading this post: I usually ride in both position (hood and drops) during a normal ride. Could I use a unique profile propertly? Thanks. S...

Good day, I have recently bought a Powerpod. I will calibrate it this week and I will do the out and back ride to check calibration step. But I have a question reading this post: I usually ride in both position (hood and drops) during a normal ride. Could I use a unique profile propertly? Thanks. Se...