AeroPod, PowerPod and Newton

This is what i did,
Switch on garmin.
Ride to wake up all sensor.
Switch on pp.
Continue for few mins.
Click “Start” on garmin to record ride.

i usually download the ride file after every ride, so eventually it just get it charge. And if i didn't use PP for more than 3 days, i will just charge for about 30minutes before the ride, just in case the battery has depleted. I did encounter red flashing light once when i forgot to charge, and can...

what does it do?

This is what i have tried few times before. 1) plug-in pp to computer 2) setup new device and choose the profile number i want, then key-in other rider information, tyre etc...lastly, choose “Best Accuracy” 3) switch on my bike computer 4) ride out and eventually bike computer will prompt connected ...

Here is my following: PP Ant garmin edge 520 garmin chest hrm ant+ wahoo ble/ant+ speed sensor on front hub wahoo ble/ant+ cadence sensor on left crank This is what i did: Switch on edge 520 Spin front wheel to wake up sensor Turn the crank to wake up sensor After that, check whether does edge 520 h...

Noted thanks alot.

Oh i see....ok that will be good....will remember that.

Lastly, if i would like to test different wheelset to look at how aerodynamic, how should i go about it and what value to look at? E.g 700c 30mm alloy clincher w/ 25mm tyre VS 700c 60mm carbon clincher w/ 25mm tyre

Thanks John. Understood. Another thing is my chest hrm is on “Profile 1”, and i want to add another wrist hrm, is it am just need to duplicate “Profile 1”, change the hrm value and saved as “Profile 2”? So that next time when i go out ride, it will auto-switch depend on which hrm i am on without a n...

Sometime is the cable which is use for charging and not for sync which result with not able to see it on Isaac. I do happen few times before. You may want to try other cable.

Hi John,

Can help to see is the ride is good to go?

Thanks.

that is what i did using powerbank.....

Just did my calibration this morning and from the look at the chart...is pretty nice :D ....but nonetheless, would like to know is it good to go....please help to check...thanks... :mrgreen: One question, currently it is set to "Profile 1". If i have to change whichever figure (e.g Rider W...

Just back from my O&B calibration using Isaac for "Best Accuracy", but the wheel size doesn't have mine when i setup for "Best Accuracy", it also doesn't have a choice for me to input my wheel size manually. So, i choose 20x1.75 instead of my 20x1.10 (1441mm based on my Garmi...

Yup...setting up for tt bike. I still have another profile, is also setup for tt but is a 20” foldable bike.

here is the file. thanks.

Did a try and can't get it paired. Here is what i got... Flash green for 18 or 19 times Flash red for 3 times Flash green for 12 times Solid green, then Off I believes that there is a bug in 6.40, so am wondering can i just use Isaac to do "Best Accuracy" to have it calibrate at the moment?

I have been in contact with Tom and understand (and you report in another thread here) that there may be bug related to profile resets after upgrade. Thanks for working on that. After trying several things I decided just to ride today, and found that when I started pp after waking sensors I had a s...

Update to New Firmware 6.40 but unable to do an O&B as it keeps giving me numerous blinking green follow by blinking red, then a few times blinking green, then off. Tried many times but still can't. Read from other thread to do a profile reset. So, i did a profile reset but prompt with "com...

I do have the same problem as you too few days ago. And was told to email to technical support which i did yesterday.

Isaac shows the correct FW version. If you're trying to do an O&B calibration, simply do a pairing process. Make sure your sensors are awake. Press-hold the button for about 4 seconds, until the green light flashes. Release the button. When pairing is successful, light will turn solid green. Th...

How about the Software Version 6.04 which shown on my Garmin Edge 520 powerpod sensor detail? Correct as well?

As thought will not have anymore Better Accuracy and Best Accuracy, but on the Isaac, it is still shown. Another thing is, on my Garmin Edge 520, i check the powerpod sensor detail, it shown Software Version 6.04, but on Isaac, i check that on the device firmware, it shown 6.40. Lastly, i have tried...