Search found 7829 matches

by Velocomp
Wed Nov 20, 2024 7:04 pm
Forum: AeroPod
Topic: Velocomp Aero:Unable to create a new profile
Replies: 2
Views: 289

Re: Velocomp Aero:Unable to create a new profile

There may be a problem with your unit. Please email technicalsupport@velocomp.com for next steps.
by Velocomp
Wed Nov 20, 2024 7:01 pm
Forum: Newton
Topic: powerpood no descarga archivos en isaac
Replies: 2
Views: 254

Re: powerpood no descarga archivos en isaac

It looks like your memory in your unit is faulty.

Do a "Device/Erase all ride files" command. This will reset your memory and hopefully fix things.
by Velocomp
Sun Nov 17, 2024 7:44 pm
Forum: AeroPod
Topic: aero software with aeropod 1 how to upgrade to 2 using firmware update??
Replies: 1
Views: 210

Re: aero software with aeropod 1 how to upgrade to 2 using firmware update??

NOTE: any existing AeroPod owner can upgrade their AeroPod (for free) to AeroPod2 simply by downloading the Velocomp Aero app and installing FW10. my aero software says time firmware 9.02 update says I need a file there is no auto get firmware it's browsing disk for firmware that I can't find. how ...
by Velocomp
Sat Nov 09, 2024 12:19 pm
Forum: Velocomp Aero Software for Mac/PC
Topic: Working with Velocomp Aero - some fundamental questions
Replies: 13
Views: 11691

Re: Working with Velocomp Aero - some fundamental questions

Press-hold up arrow of Newton to enter Setup.

Scroll with the up arrow until you find the "Eras Data" screen. Click center button. "no" flashes. Click up arrow so "yes" flashes. Click center button to erase data.

No need to use Isaac or VA to erase data!
by Velocomp
Fri Nov 08, 2024 3:00 pm
Forum: Velocomp Aero Software for Mac/PC
Topic: Velocomp Aero is replacing Isaac
Replies: 4
Views: 805

Re: Velocomp Aero is replacing Isaac

... we are strongly recommending all Velocomp power meter owners (AeroPod, PowerPod, Newton) to download and install VA software. You will be able to download and review your ride files, and you will be able to upload firmware changes from VA. ... It is implied above that VA should be able to acces...
by Velocomp
Thu Nov 07, 2024 9:39 pm
Forum: PowerPod
Topic: Ignorance is Bliss
Replies: 2
Views: 429

Re: Ignorance is Bliss

Your wind sensor is not functioning properly. It is under-reporting wind. This is the cause of your low watts.

Please email technicalsupport@velocomp.com for next steps.
by Velocomp
Thu Oct 31, 2024 5:37 pm
Forum: PowerPod
Topic: PP Loses all profiles after not charging for 3 months
Replies: 8
Views: 2399

Re: PP Loses all profiles after not charging for 3 months

At this point I'm done. Been a PP user since the beginning but this just doesn't work have reset it now three times, no previous profiles found when looking via Isaac, and when I set a new profile for a better but not best accuracy hoping to be able to go out and ride, I press the button, spin ever...
by Velocomp
Thu Oct 31, 2024 3:55 pm
Forum: Velocomp Aero Software for Mac/PC
Topic: Velocomp Aero is replacing Isaac
Replies: 4
Views: 805

Re: Velocomp Aero is replacing Isaac

Isaac will continue to be available; what's different is that we won't be updating it if OS changes are required.

We will continue to add features to VA. Thanks for bringing this to our attention.
by Velocomp
Tue Oct 29, 2024 3:16 pm
Forum: Velocomp Aero Software for Mac/PC
Topic: Velocomp Aero is replacing Isaac
Replies: 4
Views: 805

Velocomp Aero is replacing Isaac

With the release of Velocomp Aero (VA) for Mac/PC. version 1.0, we are strongly recommending all Velocomp power meter owners (AeroPod, PowerPod, Newton) to download and install VA software. You will be able to download and review your ride files, and you will be able to upload firmware changes from ...
by Velocomp
Thu Oct 24, 2024 5:04 pm
Forum: AeroPod
Topic: Pre buy questions
Replies: 1
Views: 815

Re: Pre buy questions

1). AeroPod compares applied force measurements from your standard direct force power meter (crank/pedal) to opposing force measurements made by AeroPod electronics. From this comparison the CdA number is computed in real time 2) Yes, you need a conventional direct force power meter (DFPM) 3) PowerP...
by Velocomp
Wed Oct 23, 2024 7:06 am
Forum: PowerPod
Topic: Newton Tracker
Replies: 3
Views: 938

Re: Newton Tracker

Looks like our server needs attention. We'll get it fixed...
by Velocomp
Tue Oct 22, 2024 10:59 am
Forum: PowerPod
Topic: PP Loses all profiles after not charging for 3 months
Replies: 8
Views: 2399

Re: PP Loses all profiles after not charging for 3 months

Previous rides? Even from 3 months ago. there could be another source to recover PP profiles. Old ride files might also have the profile, if nothing else changed on the bike/rider. Or am I mistaken? The first choice would be the PP NVRAM, then a fall back would be old ride files. NVRAM will not nec...
by Velocomp
Fri Oct 18, 2024 3:42 pm
Forum: PowerPod
Topic: PP Loses all profiles after not charging for 3 months
Replies: 8
Views: 2399

Re: PP Loses all profiles after not charging for 3 months

Speedyg wrote: Fri Oct 18, 2024 10:16 am Thanks for the quick reply. I'll try that. And if I do that and set the previous working profile as active, will I be again forced to do a cal ride or will it "just work," in the words of Steve Jobs?
Just work :-)
by Velocomp
Fri Oct 18, 2024 6:27 am
Forum: PowerPod
Topic: PP Loses all profiles after not charging for 3 months
Replies: 8
Views: 2399

Re: PP Loses all profiles after not charging for 3 months

Yes, profiles are stored in NVRAM.

Do a hard reset of your unit (press-hold button for 12 seconds, until light goes out briefly and then resumes flashing, then let go of button).

Try searching for your profiles afterwards; they should be there.
by Velocomp
Mon Oct 14, 2024 12:59 pm
Forum: Isaac software
Topic: Isaac problem in Mac/Sequoia
Replies: 0
Views: 2354

Isaac problem in Mac/Sequoia

If you've upgraded to macOS Sequoia, there is an inconvenient problem in Isaac/Mac. When you click on the Download folder: Screenshot 2024 .png You'll see that all of your ride files are greyed-out; that is, you can't open them by clicking on them. Screenshot 2024-.png This is a Sequoia problem both...
by Velocomp
Thu Oct 10, 2024 9:39 pm
Forum: Isaac software
Topic: MacOS Sequoia compatibility?
Replies: 1
Views: 1308

Re: MacOS Sequoia compatibility?

Hi everyone, before proceeding with the macOS Squoia upgrade, I wanted to know if Isaac is compatible or if there are problems. Has anyone already tested it? Now on MacOs Sonoma I don't have any problems, apart from some crashes every now and then when importing files from the Powerpod. V.42, just ...
by Velocomp
Sat Oct 05, 2024 5:57 am
Forum: PowerPod
Topic: Calibration support against DFPM
Replies: 6
Views: 3191

Re: Calibration support against DFPM

Yes, this setup and calibration looks excellent!
by Velocomp
Fri Oct 04, 2024 8:22 am
Forum: PowerPod
Topic: Calibration support against DFPM
Replies: 6
Views: 3191

Re: Calibration support against DFPM

In looking at your ride file I see that you had, one time only, a 4 second interval where your DFPM power was a bit higher than your PP power. Two points: 1) Assessing cycling performance (or power meter performance) on the basis of a single 4-second burst of power is not terribly meaningful 2) At e...
by Velocomp
Wed Oct 02, 2024 10:30 am
Forum: PowerPod
Topic: Calibration support against DFPM
Replies: 6
Views: 3191

Re: Calibration support against DFPM

Your ride file shows that your average wind speed is a bit higher than your average bike speed. Screenshot 2024-10-02.png This would cause PP watts to be slightly higher 4.png The way to fix this is to manually adjust the wind scaling factor in VA, such that wind speed equals bike speed. A wind scal...
by Velocomp
Mon Sep 30, 2024 3:14 pm
Forum: Velocomp Aero Software for Mac/PC
Topic: Working with Velocomp Aero - some fundamental questions
Replies: 13
Views: 11691

Re: Working with Velocomp Aero - some fundamental questions

CSV export works perfectly. Thank you for the quick implementation. I worked a bit on my own code to analyse the data and although I am sure yours is well thought-out, I feel more comfortable knowing how the data is processed. As expected, the absolute CdA you get is highly depending on the wind sc...
by Velocomp
Mon Sep 30, 2024 5:57 am
Forum: PowerStroke
Topic: PowerStroke and VeloComp Aero
Replies: 2
Views: 3115

Re: PowerStroke and VeloComp Aero

I am missing the elephant in the room!. I have VC Aero 0.4 and I have the sampling rate for PowerStroke, however I can not find where the PowerStroke is. Yes if I load Issac is there and works very well but the fact that even the image of PowerStroke is in VC Aero / About indicates that it should b...
by Velocomp
Wed Sep 25, 2024 11:08 pm
Forum: Velocomp Aero Software for Mac/PC
Topic: Working with Velocomp Aero - some fundamental questions
Replies: 13
Views: 11691

Re: Working with Velocomp Aero - some fundamental questions

I am looking into more testing this week and would like to have more control of the data. Alllow me to repeat my question whether you have plans to add a raw data export option (csv) to the Velocomp Aero App? I will see if this is possible. UPDATE: Yes, it is possible and we will include it in the ...
by Velocomp
Wed Sep 25, 2024 8:43 am
Forum: PowerPod
Topic: PowerPod V5 goes into calibration mode every ride
Replies: 5
Views: 1998

Re: PowerPod V5 goes into calibration mode every ride

Hi John, Here are files from todays ride. I also noticed the date is wrong (that is a new thing). As has been the case since I got the unit roughly 30 seconds in the PP went into calibration modes, so I did the out and back and carried on for my ride. The unit works fine solid signal and numbers th...
by Velocomp
Tue Sep 24, 2024 5:59 pm
Forum: PowerPod
Topic: PowerPod V5 goes into calibration mode every ride
Replies: 5
Views: 1998

Re: PowerPod V5 goes into calibration mode every ride

Please post a ride file.
by Velocomp
Mon Sep 23, 2024 6:03 pm
Forum: Velocomp Aero Software for Mac/PC
Topic: Working with Velocomp Aero - some fundamental questions
Replies: 13
Views: 11691

Re: Working with Velocomp Aero - some fundamental questions

I am looking into more testing this week and would like to have more control of the data. Alllow me to repeat my question whether you have plans to add a raw data export option (csv) to the Velocomp Aero App? I will see if this is possible. UPDATE: Yes, it is possible and we will include it in the ...
by Velocomp
Sun Sep 22, 2024 7:23 am
Forum: PowerPod
Topic: Pairing BT-Only HRM to PowerPod w/ANT+ Spd & Cad Paired
Replies: 1
Views: 897

Re: Pairing BT-Only HRM to PowerPod w/ANT+ Spd & Cad Paired

PP works with ANT+ sensors only, so you can't pair your BLE HR strap to PowerPod. HOWEVER...you are recording your HR signal in your Garmin. After completing your ride, extract the .FIT file from your Garmin using Garmin Connect. Export your .FIT file from Garmin connect as a .gpx file. In Isaac, wi...
by Velocomp
Sat Sep 21, 2024 8:48 am
Forum: AeroPod
Topic: Updated AeroPod 2.0 app version 1.05 is now available
Replies: 0
Views: 2766

Updated AeroPod 2.0 app version 1.05 is now available

This version adds compatibility for latest Garmin devices, including Garmin 1050
by Velocomp
Sat Sep 14, 2024 3:24 pm
Forum: PowerPod
Topic: PP no battery power
Replies: 3
Views: 2338

Re: PP no battery power

Kcblair wrote: Fri Sep 13, 2024 1:07 pm Looks all is well, again. Wish I could understand what causes this, so i can be on alert. KB
If your PP is unresponsive, do a hard reset of it: press-hold button for about 12 seconds, until light goes out briefly and then starts flashing again. Release the button.
by Velocomp
Sat Sep 14, 2024 3:23 pm
Forum: PowerPod
Topic: Weird behavior for PPod
Replies: 1
Views: 1032

Re: Weird behavior for PPod

Please do a hard reset: press-hold for 12 seconds, until light goes out briefly and then starts flashing, then release button.

This should fix things but if not, please email technicalsupport@velocomp.com for next steps.