iBike 3 for Mac download strangeness

[Norm]

On several recent rides I've downloaded the ride file (with the Save? box checked) from my gen 3 iAero and find that there is no power data. All other data is present and looks reasonable.

When I quite iBike 3, discard changes, and restart iBike 3, the ride file then displays the power data, but Rolling Watts Min/Avg/Max are Inf/NaN/Inf.

Finally, when I "Switch Profile After-the-Ride..." and tell iBike 3 to reapply the profile that is stored in the iAero and was originally associated with the ride, then I get reasonable Rolling Watts Min/Avg/Max numbers: 0 / 37.6 / 85 on today's ride.

Is the a bug or is there something strange in my setup? I've tried redownloading the profile, but that hasn't helped.

[Velocomp]

Here is your problem and how to fix it:

http://www.ibikeforum.com/viewtopic.php?f=26&t=733

[Norm]

Sorry John, I must be a little dense tonight since I can't see how my issue is addressed in the post you suggested.

Just to clarify, I'm not in trainer mode and power on the iAero looks fine. My issue seems to be isolated to the iBike 3 for Mac download and the power graph in iBike 3.

[CJS]

Try this one... viewtopic.php?f=26&t=684

It corrected this problem for me and I believe John stated in another section of the forum that the new firmware soon to be released will fix this bug.

[Velocomp]

OOPS...I posted the wrong link! CJS gave the correct link.

[Norm]

OK. That seemed to fix it. I'll post my comments on http://www.ibikeforum.com/viewtopic.php?f=26&t=684.