Help calibration after Update PP

Post Reply
Sergioperi
Posts: 29
Joined: Mon Nov 28, 2016 6:20 pm

Help calibration after Update PP

Post by Sergioperi »

Good day,

I have follow the steps you bring me to re calibrate my PP after last firmware update.

Here you are .ibr file of ride calibration and my ride of today after this.

Please, could you check it? I have observe higher wtss than before.

Regards!!
Attachments
02_08_2017_0011_43_km.ibr
(362.45 KiB) Downloaded 273 times
02_08_2017_0000_4_km_CalRide.ibr
(42.1 KiB) Downloaded 261 times
Velocomp
Velocomp CEO
Posts: 7915
Joined: Fri Jan 11, 2008 8:43 am

Re: Help calibration after Update PP

Post by Velocomp »

Actually, your ride files are perfect.

It looks like the new O&B calibration improved the accuracy of your device.

Have fun!
John Hamann
Sergioperi
Posts: 29
Joined: Mon Nov 28, 2016 6:20 pm

Re: Help calibration after Update PP

Post by Sergioperi »

Velocomp wrote:Actually, your ride files are perfect.

It looks like the new O&B calibration improved the accuracy of your device.

Have fun!
Thanks a lot!! I really appreciate your efforts to help us. A great product isn't only a good hardware, It's also all the people behind working to give the best to his customers :)

We really appreciate this!!!
Gigi
Posts: 12
Joined: Thu Dec 15, 2016 9:00 am

Re: Help calibration after Update PP

Post by Gigi »

Hi John,
here there is my O&B calibration ride. What do you think about it?
Thanks
Attachments
iBike_02_06_2017_1725_4_km_CalRide.ibr
(41.19 KiB) Downloaded 297 times
Velocomp
Velocomp CEO
Posts: 7915
Joined: Fri Jan 11, 2008 8:43 am

Re: Help calibration after Update PP

Post by Velocomp »

Perfect!
John Hamann
Gigi
Posts: 12
Joined: Thu Dec 15, 2016 9:00 am

Re: Help calibration after Update PP

Post by Gigi »

Thanks very much!!
petrs99
Posts: 18
Joined: Wed Feb 15, 2017 9:04 am

Re: Help calibration after Update PP

Post by petrs99 »

Hi, I am new to PowerPod, just recently started to use, did the calibration ride and now updated the firmware and did the O&B ride.

I have two questions:
1. Can you please check if there is everything ok in my setup? The file with the O&B calibration ride are attached..
2. I tried to put the PowerPod on the handlebar as good as possible, but the wires are.. everywhere. Can you please check from the photos if it is ok like that, or should I do any changes? ( photos - https://www.dropbox.com/sh/gwenyzobzmv7 ... TZGha?dl=0 )


Thank you for your help, cheers, Petr
Attachments
iBike_02_15_2017_1246_10_Miles.ibr
(123.95 KiB) Downloaded 261 times
iBike_02_15_2017_1234_3_Miles_CalRide.ibr
(45.99 KiB) Downloaded 251 times
iBike_02_15_2017_1225_1_Miles.ibr
(24.01 KiB) Downloaded 252 times
Velocomp
Velocomp CEO
Posts: 7915
Joined: Fri Jan 11, 2008 8:43 am

Re: Help calibration after Update PP

Post by Velocomp »

Everything is fine.

Have fun!
John Hamann
petrs99
Posts: 18
Joined: Wed Feb 15, 2017 9:04 am

Re: Help calibration after Update PP

Post by petrs99 »

Hi John, Kudos for checking on it so fast. Thank you & I will go to study other topics in here:)
petrs99
Posts: 18
Joined: Wed Feb 15, 2017 9:04 am

Re: Help calibration after Update PP

Post by petrs99 »

Hi John, so I tried to do a first longer ride with PowerPod in a windy weather and i was quite surprised that the wattage is pretty high... I would say at least.. avrg. 196 and Normalized some 245.

Can you please be so kind and check if there is everything fine with my setup after the O&B ride, which I did previously.
Thanks, Petr
Attachments
iBike_03_04_2017_0848_92_km.ibr
(662.87 KiB) Downloaded 260 times
Velocomp
Velocomp CEO
Posts: 7915
Joined: Fri Jan 11, 2008 8:43 am

Re: Help calibration after Update PP

Post by Velocomp »

Yikes, you DID ride in some major headwinds!

Your PP is calibrated perfectly (look at from KM 10 to KM 22) where there was little headwind.

Your nasty winds started at KM 50.
John Hamann
petrs99
Posts: 18
Joined: Wed Feb 15, 2017 9:04 am

Re: Help calibration after Update PP

Post by petrs99 »

Yes indeed, starting km 50 or so it started to be really crazy:-) Thanks for the quick analysis, it felt as a hard ride, but still I was not sure that the watts shall be so high.
Thanks, Petr
Post Reply