Suggestion for new feature
Posted: Wed Apr 18, 2018 2:35 pm
If you are interested in suggestions for PowerPod functionality, I would like to suggest that the head unit (e.g. Garmin) setting to calibrate a power meter is recognized by the PowerPod firmware, and triggers the setting of the PP into Out and Back calibration mode.
To allow for an accidental prod, the PP could flash a light colour, or colour sequence (red-green maybe) for, say, 10 seconds, during which time the PP button must be pressed to initiate the O&B calibration process (i.e. the same state as if a new profile had been downloaded with "Best Accuracy").
If there is no button press in the allotted time the request is ignored and PP carries on as before.
The reason this would be useful to me is because I have to ride about 10 miles to find a suitable piece of road on which I can maintain >10mph for 5 minutes. If I then screw up the sequence for some reason (OK, I'm old!), it is a 10 mile trip back home to plug in the PP and start again.
Others might find it useful to do a re-clalibration when they find an ideal stretch of road. Being able to trigger a calibration run at any time seems like a very useful feature to me.
The PP is a fantastic piece of kit - many thanks for making it and providing the excellent service evident in this forum.
Regards
To allow for an accidental prod, the PP could flash a light colour, or colour sequence (red-green maybe) for, say, 10 seconds, during which time the PP button must be pressed to initiate the O&B calibration process (i.e. the same state as if a new profile had been downloaded with "Best Accuracy").
If there is no button press in the allotted time the request is ignored and PP carries on as before.
The reason this would be useful to me is because I have to ride about 10 miles to find a suitable piece of road on which I can maintain >10mph for 5 minutes. If I then screw up the sequence for some reason (OK, I'm old!), it is a 10 mile trip back home to plug in the PP and start again.
Others might find it useful to do a re-clalibration when they find an ideal stretch of road. Being able to trigger a calibration run at any time seems like a very useful feature to me.
The PP is a fantastic piece of kit - many thanks for making it and providing the excellent service evident in this forum.
Regards