Velocomp Aero software for Windows

[Velocomp]

We recommend installing Velocomp Aero software for all AeroPod and PowerPod customers.

Here is where you can get the new Velocomp Aero (VA) for Windows software. This links you to the installer.

https://github.com/velocomp-llc/AeroRel ... -Setup.exe

After installing Velocomp Aero for Windows, any subsequent updates will happen automatically through the VA app.

ALSO: if you have never used Isaac software before, you will also need to install Silicon Labs drivers, attached. NOTE: IF ISAAC IS WORKING ON YOUR PC, YOU MAY STILL HAVE TO INSTALL THE UPDATED SILABS DRIVERS LINKED BELOW IF VA DOES NOT "SEE" THE USB CONNECTION.

CP210x_Universal_Windows_Driver 2.zip

(292.46 KiB) Downloaded 191 times

If you encounter difficulty installing the "silabser.inf" file, go here for further guidance:

https://velocompforum.com/viewtopic.php?f=93&t=6037

Here is where you can get instructions regarding how to install and use the VA software:

https://velocompforum.com/viewtopic.php?f=106&t=6032

[Jesper]

A note on the SILABS driver: I actually had to install the SILABS driver before Velocomp Aero was able to see my AeroPod - even though it was working fine from Isaac.

[Velocomp]

A note on the SILABS driver: I actually had to install the SILABS driver before Velocomp Aero was able to see my AeroPod - even though it was working fine from Isaac.

Thanks for the update...it may be that SiLabs has updated their driver from the version you had with Isaac.