Modification to RWS
-
still-chasing
- Posts: 142
- Joined: Sun Mar 28, 2010 5:23 pm
Modification to RWS
Just want to share with everybody what I did to my TT setup. The original tubing doesn't allow a tight bend without pinching the tube. You need at least 2inches in front of Newton to have a clean loop. Since I want to move my bottle closer to me, I modified the intake and added an "L" shape connector. Shaved the original intake just a bit and added the "L" connector. I now have a shorter extension with some room to move the bottle back. I can maybe go another 5mm shorter with a different "L" connector.
- Attachments
-
- 3.jpg (77.01 KiB) Viewed 15391 times
-
- 2.jpg (83.4 KiB) Viewed 15387 times
-
- 1.jpg (39.48 KiB) Viewed 15387 times
-
still-chasing
- Posts: 142
- Joined: Sun Mar 28, 2010 5:23 pm
Re: Modification to RWS
Velocomp, would this adversly affect the readings?
I've been thinking about doing something similar but rather than a 90 degree like that a 180, but curved to help direct the flow.
I've been thinking about doing something similar but rather than a 90 degree like that a 180, but curved to help direct the flow.
Re: Modification to RWS
As long as you have an unblocked tube, and the remote wind port faces the opposing wind, you should be OK
John Hamann
Re: Modification to RWS
Where did you mount the intake for the RWS?
-
still-chasing
- Posts: 142
- Joined: Sun Mar 28, 2010 5:23 pm
Re: Modification to RWS
about midway underside of left handlebar